SinceVision Adds Wide-Spot Laser Sensor for Rough-Surface Metrology

The SGI-N030W pairs an expanded laser spot with synchronized sensor heads to target stable micrometre-level measurement in battery, semiconductor and precision-assembly work.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The device uses an expanded laser spot and optical triangulation to address measurement instability that conventional point-spot laser systems can encounter when surface finishes vary.

The sensor extends SinceVision’s SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.

Wide spot targets surface noise

Conventional point-spot sensors concentrate reflected laser energy on a small area, making readings sensitive to scratches, grain boundaries, brushed textures and matte finishes. SinceVision says such features can create signal variations that are interpreted as dimensional changes, potentially producing false defect warnings and requiring extra inspection. The SGI-N030W collects reflected light across a broader area and averages local microscopic peaks and valleys before signal conversion. According to the company, this reduces the influence of surface roughness and optical scattering on materials including drawn metals, sandblasted surfaces and coated battery foils.

Specifications and synchronization

  • Reference distance of 30 mm and measurement range of ±5 mm.
  • Repeatability of 0.05 µm on a diffuse white target under static conditions, with linearity of ±0.02% of full scale.
  • Sampling frequency of 50 kHz, equivalent to a 20 µs update interval.
  • RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals.
  • Master-slave synchronization for two sensors operating in opposition on either side of a component or moving material.

Battery electrode thickness measurement

One principal application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material, while periodic spot checks cannot provide continuous coverage across a production reel.

The proposed arrangement uses two synchronized sensors above and below a moving electrode web, mounted on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure clearance to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. According to SinceVision, production trials achieved stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate supports longitudinal resolution intended to detect localized coating agglomerations, edge thinning and exposed substrate before cell winding.

Semiconductor and precision-assembly uses

In semiconductor manufacturing, the sensor is intended for non-contact work on sensitive wafer surfaces, including position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers, capturing transient displacement, mechanical oscillations, settling behavior and end-stop overshoot. Position data can be sent to machine controls through the Ethernet interface for real-time monitoring.

Surface-related false warnings

Jack Li, Global Sales and Marketing Director at SinceVision, said false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He said conventional point-beam sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing lines and creating additional manual inspection. The SGI-N030W’s expanded spot is designed to average out those variations, while sensor-head synchronization supports high-speed thickness verification.

SQ

Saira Qureshi

Saira Qureshi is an editorial writer covering portable gas detection, confined-space atmospheric monitoring, calibration and bump-testing practices, and entry-monitoring workflows for industrial workplaces. Her articles explain oxygen, combustible-gas percent LEL, and toxic-gas ppm measurement concepts, sensor response expectations, alarm setpoints, and the documentation that supports defensible confined-space programs. She helps industrial hygienists, confined-space supervisors, and maintenance teams interpret monitor evidence, plan calibration intervals, and select suitable detection equipment without overstating certification or legal compliance.